Jarrett Brake Winch 8:1 (630kg) F11620-Bare

WB-F11620

$896.85
Only 1 Left!

Jarrett 600 Series Brake Winch 8:1 (630kg) - No Cable - Winch Only



Free pick-up from store - $0.00
Free pick-up from Ansco, 12 Water Road Preston VIC 3072 between 9am and 5pm Monday to Friday.

Jarrett 600 Series Brake Winch 8:1 (630kg) - No Cable - Winch Only

The Jarrett ‘600’ series large drum capacity load brake winch contains a self activated, dual friction mechanism that automatically locks the load in position when the handle is released. This allows the operator total control over the winch, whilst preventing accidental loss of load and at the same time eliminates the danger of free spinning handle.

  • Heavy duty 4mm winch body
  • Steel bushes
  • Self actuating brake mechanism
  • Heavy duty friction disc pads
  • Spare parts available
  • Electroplated zinc cobalt handle
  • Powder coated finish
  • Removable handle

Webbing cannot be used on this winch.

Self actuating brake requires a minimum of 18kg to operate safely.

These winches are recommended for lifting and pulling applications within the rated capacity. Suitable for rural and farming applications.
Winches are not intended for the movement of people.


** Due to the weight of the winch, please contact Ansco direct to place an order if not using 'In Store Pickup'. Email: [email protected] **

(WB-F11620)

  • For maximum capacity, winches are to be installed using the four hole bolt down pattern
  • Winches are not intended for the transportation of people

Industrial and Safety Winch - 600 Series Brake Winch

 

GEAR RATIO   8:1 15:1
APPLICATION:   Lifting / Pulling Lifting / Pulling
Rated capacity:   630kg (6174N) 1250kg (12250N)
Mass (Winch only):   20kg 26kg
Type of Brake:   Self Actuating Self Actuating
Drum diameter:   100mm 100mm
Flange diameter:   180mm 180mm
Drum width:   135mm 135mm
Max cable capacity (Ø 6mm):  
Max cable capacity (Ø 8mm):  
Max cable capacity (Ø 10mm):  
45m not sup
22m not sup
15m not sup
45m not sup
22m not sup
15m not sup
Max. effort on handle at Rated Load:   19kg 22kg
Recommended minimum galvanised  
steel core cable to be fitted to winch  
G2070 7/19 G2070 7/19
Cable (to above type) breaking strain  
Ø 6mm  
Ø 8mm  
Ø 10mm  

2412kg Min. size for F11620
3390kg
5300kg

-
3390kg Min. size for F11650
5300kg
MODEL: Winch only   F11620 F11650


Notes:

This tough, long lasting Aussie winch is fitted with an automatic load actuated brake to make the toughest job easier when lifting and lowering loads.

The Jarrett '600' series large drum capacity load brake winch contains a self activated, dual friction mechanism that automatically locks the load in position when the handle is released. This allows the operator total control over the winch, whilst preventing accidental loss of load and at the same time eliminates the danger of free spinning handle.

Webbing cannot be used on these winches.

Suitable for rural and farming applications.

Self actuating brake requires a minimum of 18kg to operates safely.

Model # F11620
Barcode # 9314691916207
Unit Of Measure ea

Be The First To Review This Product!

Help other Ansco Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


Snatch Block

Snatch Block

$81.80


More From This Category