SkiMender RP360 Ski Base Repair Pistol

SST-1RP360

Professional, high-performance, robust. Heated iron-head nozzle to warm base material, adjustable trigger handle, illuminated on/off switch and detachable magnetic base stand.

Calculate Shipping

Free pick-up from store - $0.00
Free pick-up from Ansco, 12 Water Road Preston VIC 3072 between 9am and 5pm Monday to Friday.

Professional base repair tool from market leader for melting repair material into the ski base.

Ideal for permanent and professional high quality ski and snowboard base repairs.
Extremely robust tool, perfect for workshop environment
Adjustable full hand trigger for variable glue output and pressure points.
Illuminated on/off switch as power indicator and for safety.
Specially designed and heated flat nozzle for melting the repair material into damaged ski or snowboard bases (ensures biggest possible adhesion for permanent repairs).
Head temperature: Up to 230 degrees celsius
Detachable magnetic stand as comfortable holding device for the pistol.

Accessories: Stand for pistol, repair material (3 sticks black, 3 sticks transparent: 12 x 200mm), tecmat (hot melt release mat) and instruction manual.

230V-250W / Australian Plug.

Made in Great Britian.

(SST-1RP360)

User Tips for RP360

It is recommended that the user works away from themselves, using the arrow on the front of the tip to guide the tool along the repair, we find either way works just fine...pulling toward or pushing away.
The front of the head (where the arrow is) should remain approximately 1-2mm above the base, the rear should float lightly on the extruded material.
This helps to spread the base material to the adjacent base.
Most gouges are filled in just one pass.
It is important to keep the head moving at all times, a stationary head can damage the base.
Allow the repair to cool, then use a surform followed by a steel scraper to reduce and smooth the repair.
Be sure to work with a sharp metal scraper, use a scraper burnisher, you will not regret it!
Be sure to work in a well ventilated space and/or use a respirator when P-Texing.
To clean the tip, simply turn the power off and while the tip is still warm rub it across a sheet of Scotchbrite to remove any carbonized P-Tex.