FK-SKS Pocket Combi II Edge Sharpener


Sold Out

Side and base edge bevelling with fixed angles and two slots for the base edge file position.

Free pick-up from store - $0.00
Free pick-up from Ansco, 12 Water Road Preston VIC 3072 between 9am and 5pm Monday to Friday.

The Pocket Combi is a no fuss edge and base sharpening tool that's set up ready to go, for the edge you use one side if you want 89° and the other if you want 88°.

Then just slide the file out and put it in the other slot for base edge sharpening. It's honestly that simple but don't think that ease of use will compromise finish, you will still get great results and have enough time spare for an extra beer of wine.

  • This could not be any easier
  • 90° or 89° just turn it over
  • 90° and 89° covers 99% of all factory edge angles
  • Base angle is set the the standard 1°
  • File has direction indicator on it
  • No need to waist time adjusting angle
  • Perfect to remove burrs and get the sharp edge you want
  • Includes fine cut file



Instructions for using the 3117

Insert file into tool into the proper place for base or side edge beveling. To tune the side edge to the angle you desire place the tool on ski or snowboard with the angle arrow pointing at the base. It is usually best to pull the tool toward you. Notice the arrow on the fi le and insert it so that the fi le is inserted into tool with correct cutting direction. It is usually best to tune the base edge fi rst. You want to just remove the scratches on the base edge. To produce a new sharp corner work the side edge until enough material is removed to produce a sharp corner.

The 3117 Pocket Tuner is designed to accept 70mm files and stones including the DMT 70mm Diamond Stones.

Replacement and optional files:

  • 3049 70mm Fine file
  • 3200 70mm Medium file
  • 3206 70mm Mill (Coarse) file
  • 703G Green 1200 Grit DMT Diamond
  • 703R Red 600 Grit DMT Diamond
  • 703B Blue 325 Grit DMT Diamond
  • 703K Black 220 Grit Diamond
  • 703XX Silver 120 Grit Diamond
  • 3212 70mm Tungsten Carbide file
  • 3216 70mm Pro Tungsten Carbide file

Pocket sized Combi Edge Sharpener for side and base edge bevelling with fixed angles of 88° and 89°.

New shape with improved file fixing and two slots for the base edge file position (0.5 and 1°).

Model # 3117
Barcode # 4250493730526
Format Each

Be The First To Review This Product!

Help other Ansco Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category