FK-SKS Metal, Wax and Base Scraper - 135mm

SST-03316

Metal, Wax and Base Scraper. Suitable for light base planing.

Calculate Shipping

Free pick-up from store - $0.00
Free pick-up from Ansco, 12 Water Road Preston VIC 3072 between 9am and 5pm Monday to Friday.

Kunzmann Metal, Wax and Base Scraper. Suitable for light base planing.

Usefull for cleaning hairs from base and smoothing base repair areas. After application of P-TEX to the base on repair, use the metal scraper to gently remove the excess material. Can also be used to check that the base is flat.

Used to remove hairs from base and smooth base after repair
Can also be used to check the base it flat
60mm x 135mm

(SST-03316)

Sanding: this is the process of removing excess grease remaining on the slide after hot lubrication or removing excess co-fix remaining after repair. We hold the steel scraper with both hands, position it approximately 60-80 degrees (by eye) relative to the base surface, and press it against the base in a pushing motion, maintaining the correct direction, i.e., from nose to tail.

A metal scraper is used for base repair work (removing excess co-fix and removing irregularities).